OTHER TOOLS
LOCK MANDREL
The lock mandrel is a downhole completion device, run and retrieved by slick line and anchored in the Landing Nipple within the tubing string, provide a setting point for flow-control equipment such as valves chokes and plugs. Almost unlimited locations for setting and locking subsurface flow controls, has extra Large ID for higher flow volumes.
LOCK ADAPTER
STANDING VALVE
TEXT FIXTURES (TEST CAP/TEST PLUG)
Test Fixtures are used to check the pressure rating of the Testing Equipment.
RUNNING TOOL
Tool which is used in the placement or setting of downhole equipment such as permanent packers or plugs. Capable of being retrieved after the working/setting process.
PULLING/RUNNING PRONG
Used in conjunction with a X Line Running Tool to manipulate "X" equalizing assemblies.
WIRE LINE ADAPTER KIT
DEFORMATION TOOL
SWIVEL SUB
Enables surface connections to be in one place while the work string is rotated and moved vertically.
SLOT TOOL
CHEMICAL INJECTION MANDREL
CIM is a tubing retrievable system, with a chemical injection valve fixed on the mandrel, used for continuous chemical injection to the well. Injection valve is independent of mandrel loading, all connections externally pressure testable.
HYDRO TRIP SUB
EXPANSION/COMPACTION JOINT
PUMP OUT PLUG
SLIDING SLEEVE DOOR
SSD are used to isolate flow from one or more reservoir zones or to regulate pressure between zones. Regulates the flow of fluid into a well during hydraulic fracturing or proppant fracturing process.