CP-Logo-White_edited.png

OTHER TOOLS

LOCK MANDREL

The lock mandrel is a downhole completion device, run and retrieved by slick line and anchored in the Landing Nipple within the tubing string, provide a setting point for flow-control equipment such as valves chokes and plugs. Almost unlimited locations for setting and locking subsurface flow controls, has extra Large ID for higher flow volumes.

LOCK ADAPTER

STANDING VALVE

TEXT FIXTURES (TEST CAP/TEST PLUG)

Test Fixtures are used to check the pressure rating of the Testing Equipment.

RUNNING TOOL

Tool which is used in the placement or setting of downhole equipment such as permanent packers or plugs. Capable of being retrieved after the working/setting process.

PULLING/RUNNING PRONG

Used in conjunction with a X Line Running Tool to manipulate "X" equalizing assemblies.

WIRE LINE ADAPTER KIT

DEFORMATION TOOL

SWIVEL SUB

Enables surface connections to be in one place while the work string is rotated and moved vertically.

SLOT TOOL

CHEMICAL INJECTION MANDREL

CIM is a tubing retrievable system, with a chemical injection valve fixed on the mandrel, used for continuous chemical injection to the well. Injection valve is independent of mandrel loading, all connections externally pressure testable.

HYDRO TRIP SUB

EXPANSION/COMPACTION JOINT

PUMP OUT PLUG

SLIDING SLEEVE DOOR

SSD are used to isolate flow from one or more reservoir zones or to regulate pressure between zones. Regulates the flow of fluid into a well during  hydraulic fracturing or proppant fracturing process.

13 Tuas Avenue 6, Singapore 639301  |  Tel.+65 6897 8970  |  sales@completionproducts.com

©2016 Completion Products pte ltd.  All rights reserved. Privacy Policy. Credits.